Philips Comfort Smart Air Purifier

Product Features

(CADR)

Up to 250 m3/hour: purifies rooms up to 65 m2

CADR (Clean Air Delivery Rate) is the volume of clean air generated in one hour. The higher the CADR value, the key performance indicator of an air-purifying device

is 250 m3/hour (1) and can also purify an entire room up to 65 m2 CADR. The air purifier features a CADR rate. The higher the pollution in the room, the higher the value

99.97% of particles as small as 0.003 microns

thanks to three-stage purification including a NanoProtect HEPA filter, active carbon filter, and pre-filter, capturing 99.97% of ultra-fine particles down to 0.003 microns (3) to protect you from

PM2.5 particles, bacteria (4), pollen, dust, pet dander, gases and other pollutants

Removes up to 99.9% of airborne viruses and aerosols

To confirm its ability to remove 99.9% of airborne viruses and aerosols, tested separately by airmid health-group for aerosol capture, including aerosols that may carry respiratory viruses

Effortless, healthy humidification

NanoCloud technology humidifies the air quietly and effectively with up to 99% (6) less bacteria, through natural evaporation to create an invisible mist of pure water vapor particles of very small size. Thanks to their small size

they humidify the air evenly and make it very difficult for bacteria and minerals to attach, preventing the spread of bacteria and white dust in the room

Automatic humidification up to 500ml/hour with 4 settings

Humidifies the air quickly with a water humidification rate of up to 500ml/hour (2). The humidity level in the air is sensed and humidification is automatic to the desired level. Set the target humidity level to 40%, 50%, 60% or 70%, and the humidifier will turn on or off automatically to reach the desired humidity level

AeraSense technology senses and displays air quality

The AeraSense sensor scans air quality 1000 times per second and shows your home air quality at a glance. The display digitally shows the PM2.5 level, plus an intuitive color ring

Rigorously tested for quality you can trust

Philips air purifiers undergo up to 170 mandatory, rigorous inspection tests before leaving the factory. They also undergo strict durability and lifespan testing for continuous 24/7 operation

Sleep mode with very quiet operation

In sleep mode, the display lights dim, and the air purifier runs almost completely silently to provide you with clean air while you sleep

2-in-1 setting and purifier-only setting with Auto and Manual modes

Switch between 2-in-1 mode and purifier-only mode at the touch of a button. In Auto mode, the sensors intelligently select the right speed for your home. Run the purifier in either Auto mode (General or Allergen), Sleep mode, or choose from 4 speed levels: Speed 1, 2, 3, and Turbo, for full control over airflow and noise level

Track and control via app

The Clean Home+ app lets you monitor air quality and control the purifier anytime, anywhere

Get alerts when air quality becomes unhealthy

Low energy consumption

Thanks to the purifier energy-saving design, the device can run at a maximum power of 35W, equivalent to the power used by a standard light bulb